[:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:]                                                                 [:=:][:=:]   New Wave  presents...                                         [:=:][:=:]                                                                 [:=:][:=:]                                                                 [:=:][:=:]                     BBS CRASHING TECHNIQUES                     [:=:][:=:]                    -------------------------                    [:=:][:=:]                                                                 [:=:][:=:]                                     by Mr. Memorex   1/27/87    [:=:][:=:]                                                                 [:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:][:=:]             - File Formatted for 80 columns like it or not - To start off with, I'd just like to say this file is a collectithe latest BBS crashes. Many people have grudges and reasons to 'crash' a bbs, well this file is served as an aid to them and also to sysops who want to prevent their own bbs' from being attacked. And that's enuff talk for now, let's get on with the good stuff (everything is in cookbook format for speedy reading).[-=:  Apple Net :=-]1. Post a message (can be bbs,feedback,newuser etc.)2. Press space bar util you get to the very last line (40th col.)3. type ctrl-D4. (after the word wrap to next line) Type any dos command (Preferrably FP)5. get into editor ('/E')6. list the program7. You should be in basic or executing whatever dos command you enteredRequirements:- Must have wordwrap activated- 40 columns mode should be activated- Their must be a (L)ist command in the editor[-=: Telecat 2.x & 3.0 :=-] 2.x-----1. Go to the board section2. Newscan the last board accessable3. After the first message, type 'B' at the prompt (To jump to next board)Results:- If it was the last board on the bbs, chances arethat will break into Basic- If not, then it will go on to the next board (which is handy and surpassess  the security level crap) 3.0-----1. Post Message2. Type a line of text3. type ctrl-V Results:- This should either hang the system or break into basic- It is trying to center the line but it fucks up[-=: GBBS Pro :=-]Method 1:1. Go the the editor2. Hold down tab key3. or press space and type ctrl-CMethod 2:1. Upload to a full volumeMethod 3:1. read the userlist2. hang up when it gets to the Sysop3. call back and log on and you'll be a sysop[-=: Proving Grounds :=-]Method 1:1. (On older versions) Enter decimal or negative numbersMethod 2:1. Call board and enter the user number of a Remote sysop2. Enter any bs for a pw3. Do the same thing again (more garbage the 2nd time it asks)4. Now enter your real number and pass5. At the first input prompt type 'Remote'6. This should give you the Remote Sysop menu and accessNotes:- Using Sysop's user# will give you 10 extra minutes on system- The second method works only on unmoded newer versions of Proving GroundsOk, well that about wraps it up. Remember, all these crashes work only onunmoded boards (which are on the most part run by leeches and geeks).If you have any questions or more tips for Vol.2 then leave me mail onHalifax 20megs (301)445/5897  or  Eastern Alliance 10megs (201)327/5725and where else you see me. Both are fine boards. Have Fun![-------------<THE BAND>--------------]Mistywood BBS/AE/CF........818/335-5651Mistywood // BBS...........602/220-9363The Wizards Guild..........409/696-8226Den o/Crude Tort...........617/832-9229Sirius Cybernetics.........808/528-2436[-------------------------------------]DOWNLOADED FROM P-80 SYSTEMS.....